With regards to your question, I would advise you to refer to our product development schedule as attached.
Our company has a strict policy on the pressure and measurement test.
Our usual payment terms are telegraphic transfer(TT), LC and open account. Please advise if you require other payment methods.
We accept paypal. We can only provide an estimated shipping date. No cancellation of order once order is confirmed.
Regular box. Please advise if you require special packaging.
Your forwarder cannot release the container or surrender B/L unless instructed by us.
We use the following forwarders such as MSC, China Shipping, CMA and Maersk.
We provide B/L, commercial invoice, packing list, certificate of origin. If you require further documentation, please advise.
We are sure that our products have gone through intensive testing and launched with successful results. A fee of US$400 will be collected for 1 Pack of regular size iSUP borad. We agree to testing of 1 iSUP borad upon your first order of 20 footer container. Upon your first order, we will return your deposit for these testing iSUP borad.
We accept order of any volume.
We deal with USD only.
We will go through a strict dealer selection process and support our dealers in their growth.
We appoint dealership against our expected volume. IF you can fulfill our requirement, we see no reason to appoint other dealers.
We have invested significantly in the production of our brand and would appreciate your marketing to your targeted audience.
Please advise us the ordering volume.
Yes, if there are no dealers in those countries
All marketing materials will be prepared beforehand and all publicity materials will be provided depending on your order. Please advise if you require more.
Please refer to attached. The phamplet ad highlight the design and engineered in japan and stiffen and reinforced sidewall
We will provide support of 4% of your annual sales revenue. We will provide a rebate accordingly
We will stop sourcing new suitable deal in that country for nex 30 days, on condition that you pay us only 1 dolor.
As we do not any customers who have this requirement, we will look into this issue and consider.
These iSUP borad are built for extreme iSUP borad conditions, we do not have warranty for this current series of iSUP borad. Surface defects will be assessed on a case by case basis.
We have strict policy on the physical conditions. If you have any issue, we will handle it case by case basis
Not only do we ensure strict quality standards, we attach personnel in all manufacturing processes.
We have direct agreement with manufacture with dedicated production of this product.
Zaatt is an improvement through our past successes.
Our parent company have successfully launched multiple products and Zaatt brand is our improvement through our past successes. Our products have been exported to more than 30 countries.
We enforce strict quality standards in our production facility. The iSUP borad carcass has a very established technology, the bi-layer PVC has a fixed formula.
Test three steps, pressure, outlooks and field test.
Usually, a drop-stich material length is 300 meters, and make about 240 boards. But BULK order MOQ is only 50 pieces as regular clients order on average, so here is the quantity step for different price, 1, 50 and 240 pieces.
We will be producing various short clips and would appreciate support for local production.
We have new team in excess of 10.
We are based in China. We are working with 1 of the top 10 manufacturer based in Weihai, Shandong Province, China.
It is 300,000 annually.
When inflated correctly and used for general Stand Up Paddling you will hardly notice a difference. For high performance surfing you will find you will have to adapt your style as the board rides differently but still rides well. The biggest benefit is that you can deflate, roll up and stash your board in the back of the car with ease, and transporting it further afield is really easy. Our boards love to travel.
Over time you will experience some loss of pressure especially with temperature changes. Just top it up before you hit the water. The board should be stored out of direct sunlight and if you are not going to use it for a while you should reduce the pressure to below 15psi.
Our boards are built to take a lot of pressure. You won’t need to put more than 25psi in your board. Above this pressure you will see no increase in stiffness but you will find the valve is hard to push down to deflate the board and it takes longer to inflate. For general use 15-22psi is best. Heavier riders will benefit from pressure closer to 25psi.
Treating your board like an old friend will keep the board looking good for the longest time. Ideally wash it down with fresh water after each use, keep it out of direct sunlight and store loosely rolled.
Inflatable boards don’t like to be cooked in the sunshine so keeping it cool and in the shade when not in use are the keys to a long and fruitful relationship.
In the unlikely event that you put a hole in your board then inside the repair kit (that comes with every board) you will find some glue and some patches that can be used to get you back up and running. A good repair should be left overnight to cure. Also inside the repair kit is a valve tool. You can use this to remove the valve from the board for servicing. You may never have to remove it but if you do you’ll have the right tool for the job.
No, but we don’t recommend leaving your board in direct sunlight for prolonged periods. Following this advice will keep your board in good working order for as long as possible.
You can store the board rolled up in the bag, or fully inflated or partially inflated. If you don’t plan to use your board for a long time we recommend you store it in a cool, dry place and loosely rolled.
We have distributors, please find distributor page.
After each use, be sure to rinse your board off with freshwater and let dry fully before storing. It is best to keep both inflatables and hard boards out of direct sunlight. Keep them in a shed or garage – any sort of covered storage – it doesn’t need to be temperature controlled. It’s the sun’s UV rays that can shorten the lifetime of the board.
it is very important to keep them out of direct sunlight. Always keep them shaded when out and not in use. It is a good idea to flip the board over so the black dek pad is on the ground so to keep the board’s temperature down. You can clean off scuff marks by lightly sanding with high grit sandpaper or even rubbing wet sand over the mark.